The ADL series refrigerated dryer is equipped with a shell and tube heat exchanger for optimum performance and low pressure drop. It supports inlet air temperatures within normal range from 38℃ to 45℃. The air flow capacity of the refrigerated air dryer ranges from 0.7 to 130m3/min.

Available with built-in after cooler and independent fan, this series of compressed air dryer supports maximum inlet air temperature as high as 80℃, and boasts no effect on the dew point. The all-in-one structure largely simplifies the design of compressed air system...

This range of heatless regenerative desiccant dryer is especially suitable for compressed air systems which are exposed to ambient temperatures of 0°C or below, as well as places that require compressed air with extremely low water content.

The KXC series heat of compression desiccant dryer is designed to remove water from compressed air in an extremely effective way, by offering pressure dew point of -40°C. It makes full use of the heat generated during air compression process for desiccant regeneration.

This heated regenerative desiccant dryer takes advantage of Siemens S7200 or S7300 PLC controller to realize all the functions, and also adopts the 7" touch screen to display the working status.

The dew point can be as low as -70℃.
The desiccant has a prolonged service life which is 3 times longer than that of common desiccant air dryers. So, maintenance cost is cut down.